top of page

Inkjet printer

Nano ink, metal nano ink, conductive ink, conductive ink, plating base, circuit board, electronic components, coating, inkjet, printing

C-INK aimed to create "the perfect printer for printing nano ink."

C-JET; inkjet printer for nanoink

In November 2024, C-INK Co., Ltd. began selling the inkjet printer C-JET.

【IKEDA SCIENTIFIC Co., Ltd. Online Catalog (Japanese page) 】

ナノインク用インクジェットプリンター | オンラインカタログ | 株式会社池田理化

C-JET.jpg

Flatbed printer

The C-JET is a flatbed printer that can print on substrates that cannot be fed with paper and on thick boards.

It can print up to A3 size.

The C-JET's L/S is 150μm/150μm, making it suitable for prototyping electronic components.

A sheet-type heater can be attached to the stage to prevent the nano ink from bleeding or spreading.

2

Advantages of printing C-INK nano-ink

C-INK's nano ink is water-based, so it produces less odor when printed compared to solvent-based inks.

It becomes conductive after 30 minutes of processing at 120°C,

so materials with low heat resistance can be used as substrates.

C-INK nano ink prints can be sintered with a laser.

LaserSintering01.jpg

3

Use of aluminum bag container

The C-JET uses an aluminum bag as the ink container.
- Ink containers can be easily installed and replaced. - The aluminum bag has high gas barrier properties, preventing oxidation and deterioration of the nano ink.
- Ink capacity (100mL to 1,000mL) according to ink usage and aluminum bag replacement frequency

bottom of page